Radium FPR Silver Orifice - 0.175"
Replacement orifice for many Radium Engineering products including MPR, DMR, FPR-D, FST-R, etc.
Radium Silicone Coupler 2.5" ID
The 5-ply silicone couplers are fiber reinforced for strength and come in different sizes. Ideal for air intake systems and turbo intercooler piping. Available in black only. Dimensions are inside diameters. The 2.5" straight coupler...
Radium E85 Safe Reinforced PCV/Fuel Hose - Sold Per Metre
This Radium Engineering Fuel/PCV hose is found in both crankcase ventilation oil catch can systems and high pressure fuel injection applications. Unlike heater hose, this Fuel/PCV hose resists engine oil, gasoline, diesel fuel, ethanol fuel...
Radium Hose Separator Clamp 2 Way Threaded
Anodized black billet aluminum clamp used for securing -6AN hard tubing, wire harnesses, etc. Includes a M6x1mm stainless steel bolt. Both inner diameters (ID) are 0.39inch (or 10mm). The bottom clamp is thread tapped. The...
Radium MPFST O-ring Service Kit
The 20-0088 O-Ring Service Kit is for the large (6" OD) surge tank canisters. INCLUDES: Large gaskets for canister lids (x2)
Radium Intake Manifold Gasket - Toyota Supra A90 19+
These Radium Engineering gaskets press into the intake manifold ports and seal to the cylinder head. They are compatible with many B58TU engines including the following:
Radium FPR Spring- Wide Range (Use with Radium MPR, DMR, and FST-R)
Replacement internal spring for the following Radium products: MPR Regulator, P/N 20-0100-00, 20-0100-01 DMR Regulator, All Versions FPD-R Pulse Damper, P/N 20-0176, 20-0178
Radium PushLok Hose Ends
Reuseable black aluminum PushLok hose ends. Can be used with Radium PCV/Fuel hose. 6AN is for 3/8" hose 8AN is for 1/2" hose 10AN is for 5/8" hose 12AN is for 3/4" hose Notes: All...
Radium AN ORB to Male AN Flare Fitting
These threaded adapter fittings are compatible with AN ORB (O-ring boss) ports. Because the threads on these fittings are not used for sealing, PTFE paste or thread sealant is not required. The O-ring should be...
Radium AN ORB to Hose Barb Fittings
These threaded adapter fittings are compatible with AN ORB (O-ring boss) ports. Because the threads on these fittings are not used for sealing, PTFE paste or thread sealant is not required. The O-ring should be...
Radium AN Male to NPT Male Straight Fittings
NPT (National Pipe Thread) fittings seal by the intentional interference created by the tapered threads meshing together. Always use a small amount of PTFE paste or tape on NPT threads and tighten to finger tight,...