Radium V2 4AN ORB to 6AN Male Flare Low Profile Swivel Banjo Fitting
These banjo fittings have the ability to rotate 360 degrees, even after installation. They are an excellent option for 90-degree connections and are very low profile. Suitable for use in high pressure fuel and oil...
Radium FPR Adaptor, 8AN ORB, 16mm Bore, 50mm Spacing, M6
These anodized billet 6061 aluminum adapter fittings allow an OEM fuel pressure regulator (FPR) or fuel pulse damper (FPD) to be reused in an application other than the OEM fuel rail. All fittings permit the...
Radium FPD Adapter 8AN ORB/11mm Bore/42mm Spacing/M6 - Nissan 350Z 03-07/Skyline V35 (VQ35DE)
The OEM VQ35DE fuel pulse damper can be reused with this adapter. One is required. NOTES: If the 20-0468 plumbing kit (listed above) was purchased, this adapter is already included and thus, not necessary. Use...
Radium 12AN ORB 5-Bolt SAE Adapter
To use a Radium Engineering DSV on an old FCST that has 8AN ORB vent threads (20-014X-XX), this adapter can be used. However, a fuel level sender cannot be used with this adapter in place.
Radium EGR Delete Kit - Toyota Supra JZA80 (2JZ-GTE)
An exhaust gas recirculation (EGR) system transfers hot exhaust gasses back through the intake manifold in order to lower nitrogen oxide emission levels. However, the EGR inevitably increases intake temperatures and dilutes the necessary oxygen...
Radium FCST Fuel Cell Surge Tank Fill Neck Block Off Kit
This kit blocks off the filler hole on the Radium FCST units. Included:
Radium FPR Adaptor 8AN ORB, 11mm Bore, 32mm Spacing, M5 - Subaru/Nissan/Mazda RX-7
These anodized billet 6061 aluminum adapter fittings allow an OEM fuel pressure regulator (FPR) or fuel pulse damper (FPD) to be reused in an application other than the OEM fuel rail. All fittings permit the...
Radium FPR Adaptor 8AN ORB, 16mm Bore, 39mm Spacing, M6 - Mitsubishi Evo 4-9
These anodized billet 6061 aluminum adapter fittings allow an OEM fuel pressure regulator (FPR) or fuel pulse damper (FPD) to be reused in an application other than the OEM fuel rail. All fittings permit the...
Radium FPR Adaptor 8AN ORB, 11mm Bore, 39mm Spacing, M6 - Subaru WRX STI 01-07/Mitsubishi Evo X/Mazda MX-5/Toyota 2JZ
These anodized billet 6061 aluminum adapter fittings allow an OEM fuel pressure regulator (FPR) or fuel pulse damper (FPD) to be reused in an application other than the OEM fuel rail. All fittings permit the...
Radium Vented Fill Neck Cap Only
This is replacement fill neck cap. Compatible with Radium Engineering 20-0197-V. Included:
Radium Fuel Level Sensor Block-Off Kit
his block-off plate kit is used when the 5-bolt SAE flanged fuel level sensor is not used. This is extensively used for customers with the Radium Fuel Cell Surge Tank but could be adapted to...
Radium Flange for Denso MAF Sensor
Weld-on CNC machined mass air flow flange for a Denso air meter. Perfect for those designing their own custom inlet pipes. Machined radius is designed to be used with a 2.75" outside diameter aluminum pipe....