Radium Fuel Level Switch, 1/8" NPT
This 1/8" NPT fuel level switch should be installed inside the container, as shown below. When fuel level drops, a switched signal can be sent to a unit such as a dashboard mounted indicator or...
Radium FPD Adapter 8AN ORB/11mm Bore/42mm Spacing/M6 - Nissan 350Z 03-07/Skyline V35 (VQ35DE)
The OEM VQ35DE fuel pulse damper can be reused with this adapter. One is required. NOTES: If the 20-0468 plumbing kit (listed above) was purchased, this adapter is already included and thus, not necessary. Use...
Radium FPD Adapter 8AN ORB / 27mm Bore - Nissan 350Z 07-09/370Z/Skyline V36/Infiniti G35/G36 V36 (VQ35HR/VQ37VHR)
The OEM VQ35HR and VQ37VHR fuel pulse dampers can be reused with these adapters. One is required for each fuel pulse damper. NOTES: If the 20-0469 plumbing kit (listed above) was purchased, these adapters are...
Radium Fuel Rail Kit - Nissan 350Z/370Z/Skyline V35/V36/Infiniti G35/G37 (VQ35/37)
The Radium Engineering fuel rails have been confirmed to be compatible with the VQ35DE, VQ35HR, and VQ37VHR engine. However, there are other V6 Nissan VQ variations that are very similar. The fuel rails are machined...
Radium Top Feed Fuel Rail Conversion Kit - Nissan KA24DE
This Radium Engineering fuel rail is a direct bolt-on with all twin cam Nissan KA24DE engines. Manufactured with a large 0.69" internal bore, the fuel rail can support all necessary engine power requirements. The Radium...
Radium Fuel Hanger Surge Tank Feed w/Microglass Filter - Mazda RX-7 FD 92-02
Radium Fuel Hanger Surge Tank Feed w/Microglass Filter - Mazda RX-7 FD 92-02
Radium Fuel Hanger Surge Tank Feed w/Stainless Filter - Mazda RX-7 FD 92-02
The included Radium Engineering fuel filter assembly mounts to the rear subframe underneath the vehicle using a specifically designed FD RX7 bolt-on billet mount. The filter is mounted through a Radium Engineering heat exchanger to...
Radium Fuel Hanger Surge Tank Feed w/Filter - Mazda RX-7 FD 92-02
The feed kits use high flowing -8AN fuel lines. A 1/2" vapor shield feed hose runs from the fuel pump hanger outlet to a Radium Engineering fuel filter secured to the rear subframe. From there...
Radium Fuel Pump Hanger Suit AEM 50-1200, No Pumps - Mazda RX-7 FD
Radium Fuel Pump Hanger Suit AEM 50-1200, No Pumps - Mazda RX-7 FD
Radium ACV Delete - Mazda RX-7 FD 92-02 (13B-REW)
This blocks-off the ACV (air control valve) port from the Mazda 13B-REW lower intake manifold. The low profile nature of the countersink stainless steel screws and anodized aluminum plate permits the necessary room for a...
Radium Fuel Filter Mount - Mazda RX-7 FD3S
The OEM fuel filter on these vehicles is very difficult to service. This kit however, mounts the fuel filter in an easily accessible area on the rear subframe. The mounts feature cooling fins that benfit...
Radium Fuel Rail, Top Feed Conversion, Mazda 13B-REW Secondary
PORTS AND FITTINGS The fuel rail ports are tapped for 8AN ORB. 8AN ORB Adapter Fittings can be found HERE. 8AN ORB Direct Mount Regulators can be found HERE. 8AN ORB Fuel Pulse Dampers can be found HERE. Fuel Pressure...