RADIUM ENGINEERING

A 1-way check valve permits flow in 1 direction only. The Radium Enginering universal check valve features a lightweight anodized aluminum body with Viton seals and stainless steel hardware. As shown below, the internal plunger's...

This kit replaces the restrictive OEM banjo bolt and runs a 6AN hose directly from the fuel filter to the fuel rail. Furthermore, two FPR adapers are included to reuse either variation of the Mitsubishi...

Manufactured with a large 0.69" internal bore, the fuel rail can support all necessary engine power requirements. The rail is CNC machined from solid 6061 aluminum, anodized and laser etched for a high quality surface...

Adapts both ends of the crankcase ventilation connector on many engines to 10AN male. These are primarily used for air/oil separation catch cans. Machined from 6061 billet aluminum. For corrosion protection, they are anodized type-II....

Radium Engineering valve for PCV (positive crankcase ventilation) systems. Do not mistake this for a simply one-way check valve. The PCV valve's internal plunger dynamically meters the appropriate amount of crankcase vent airflow based on...

The 20-0527 Remote Mount Fill Neck, Straight, 1.5in Barb is multi-functional and is primarily used with a body-mounted remote filler (not included). The fill neck has a machined hose barb connection for 1.5" filler hose...

The Radium Engineering fuel line retaining kit supports large aftermarket fuel lines under the 2008-2014 Subaru Impreza, WRX, and STi. The retainers are made from 6061 aluminum and anodized to resist oxidation. Includes 2 types...

Radium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. These kits mount using factory holes and integrate perfectly with the surrounding...

Fuel Level Switch, 1/8 NPT This 1/8" NPT fuel level switch should be installed inside the container, as shown below. When fuel level drops, a switched signal can be sent to a unit such as...

These engines include the 2JZ-GTE and 1JZ-GTE Non VVT-i (above) as well as the 2JZ-GE (shown below). There are many other engines not listed. They simply "pop" into the intake manifold (1 required per injector)....

The Radium Engineering fuel pump hanger permits the use of 1, 2, or 3 aftermarket pumps in the stock MK4 Toyota Supra (JZA80) fuel tank. This system is compatible with the following fuel pumps: Walbro...

Radium Engineering 10AN low profile swivel fittings simply press-in. No drilling or welding required. 20-0509 Suits Toyota 1JZ VVti Exhaust Side. The 20-0509 low profile 11.8mm press-fit banjo fitting has a 12.0mm long snout. FEATURES:...