CAN Adaptor Loom - DT-4 to DTM-4
CAN Adaptor Loom - DT-4 to DTM-4 Suits: CAN Keypad 2 x 4 and 3 x 5 Includes: 1 x HT-130045 - Adaptor Harness Notes: CAN Cable - DT-4 to DTM-4 Adaptor- Suits CAN Keypad...
CAN Adaptor Loom DTM-4 to 6-pin Circular Connector
CAN Adaptor Loom DTM-4 to 6-pin Circular Connector Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force GDI) Includes: 1 x CAN Adaptor Loom (DTM-4 to 6-pin Circular Connector)...
CAN Adaptor Loom DTM-4 to Flying Leads
CAN Adaptor Loom DTM-4 to Flying Leads Suits: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series Connector Includes: 1 x HT-130046 CAN Adaptor Loom (DTM-4 to Flying leads) Notes:...
CAN Adaptor Loom DTM-4 to JST 5-pin
CAN Adaptor Loom DTM-4 to JST 5-pin Suits: Haltech IC-7 Dash, WBC 1, WBC 2 and Link Plug-in ECUs Includes: 1 x CAN Adaptor Loom (DTM-4 to JST 5-pin) - Suits Link PlugIn ECUs Notes:...
CAN Adaptor Loom DTM-4 to Minifit Jr
CAN Adaptor Loom DTM-4 to Minifit Jr Suits: Haltech iC-7 and Microtech ECUs Includes: 1 x HT-130049 Can Adaptor Loom Notes: Use with Microtech CAN Hub for direct plug and play
CAN Adaptor Loom DTM-4 to Molex Mizu-P25 - Suits Holley
Suits: Haltech iC-7 / uC-10 Includes: 1 x HT-130053 Can Adaptor Loom OVERVIEW: CAN Adaptor Loom DTM-4 to Molex Mizu-P25 - Suits Holley Used to connect supported Haltech CAN devices to the CAN connector found on Holley...
CAN INTERFACE CABLE - 2 METRES
CAN INTERFACE CABLE - 2 METRES DESCRIPTION MoTeC provides solutions to connect the device to the PC's parallel (printer) port or USB port. For most devices the USB port is preferable, however some older devices...
CAN Keypad 15 button (3x5)
SUITS: Haltech NSP compatible devices THREAD: M6INCLUDES: 1 x 15 Button Keypad (3x5), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Label Set, 1 x Mounting Nut...
CAN Keypad 8 button (2x4)
SUITS: Haltech NSP compatible devices INCLUDES: 1 x 8 button keypad (2x4), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Label Set, 1 x Mounting Nut and...
