Products

What is a fuel surge tank? A fuel surge tank (FST) is designed to prevent fuel starvation to the engine on vehicles with inadequate fuel tank baffling. Fuel is supplied to the surge tank by...

What is a fuel surge tank? A fuel surge tank (FST) is designed to prevent fuel starvation to the engine on vehicles with inadequate fuel tank baffling. Fuel is supplied to the surge tank by...

What is a fuel surge tank? A fuel surge tank (FST) is designed to prevent fuel starvation to the engine on vehicles with inadequate fuel tank baffling. Fuel is supplied to the surge tank by...

The Multi-Port Regulator-Rotating Assembly (MPR-RA) is a great solution for both simple and complex high-flow fuel systems. Its unique port configuration makes it ideal for combining dual fuel pumps into a single feed line. Conversely,...

DISCONTINUED MODEL - RUNOUT SPECIAL This is replacement fill neck cap. Compatible with Radium Engineering 20-0147 and 20-0197. Included: Non-Vented Fuel Fill Cap FKM Viton O-ring

NPT (National Pipe Thread) fittings seal by the intentional interference created by the tapered threads meshing together. Always use a small amount of PTFE paste or tape on NPT threads and tighten to finger tight,...

The 20-0087 O-ring Service Kit is compatible with both new and old style "standard" (4" OD) fuel surge tanks (FST and FST-R). INCLUDES: Small O-rings for M5 bolts (x16) Large O-rings for older style FST...

Adapts both ends of the crankcase ventilation connector on many engines to 10AN male. These are primarily used for air/oil separation catch cans. Machined from 6061 billet aluminum. For corrosion protection, they are anodized type-II....

Radium 7-Pin Plastic shell bulkhead connectors suit the original MPFST (multi pump fuel surge tank) are no longer used in Radium products, but limited quantities of 17-0027 and 17-0028 service parts are still available.

These fuel tubing kits are commonly used for plumbing in-tank submerged fuel pumps. The flexible convoluted tubing is manufactured from polyamide nylon and is therefore resistant to all fuel types including alcohol blends such as...

These plumbing kits are designed to compliment Radium Engineering Subaru EJ fuel rail installations. Both kits interface with the factory feed and return hard lines in the engine bay (near the LH strut tower) and...

The Radium Engineering PCV Baffle Plate mounts to the engine block and replaces the factory plastic PCV plate and valve. Compared to the OEM unit, the CNC machined aluminum Radium Engineering PCV plate features an...