Products

This high volume fuel rail works on all 2ZZ-GE engines. Both ends of the rail are tapped to 8AN ORB female threads. These ports use positive o-ring seals instead of tapered pipe threads which commonly...

Radium Air Filter 0.75" ID

A high powered modified engine tends to generate excessive blow-by oil and gasses. In these cases, an ordinary small catch can may quickly fill with oil and not be adequate. Like the Radium Engineering Catch...

Radium Air Oil Separator w/RHD Bracket - Subaru WRX 08-14/STI 08-21

A high powered modified engine tends to generate excessive blow-by oil and gasses. In these cases, an ordinary small catch can may quickly fill with oil and not be adequate. Like the Radium Engineering Catch...

The alternate location mounting kit is required if an Radium Engineering Crankcase Catch Can Kit interferes with other components, such as an aftermarket intake system. The kit works in conjunction with any of the EVO...

Radium AN Bulkhead Fittings with Jam Nut. Used to create a connection through another surface (firewall etc.).

Radium AN Coupler, Female to Female. Only suitable for AN Male Flare fittings.

Radium Male AN flare to barb fittings in various sizes. These are not PushLok and will require clamping.

Radium Metric Fittings are a just a few of the optional fittings for both inlets and outlets of the catch cans, manifolds or any other project you have.  

6AN, 8AN, 10AN Tee Adapter Fitting: -AN Male to -AN Female with 1/8 NPT Female threads. This is commonly used to install a sensor or a gauge inline with a -AN hose. Note: Gauge not...

NPT (National Pipe Thread) fittings seal by the intentional interference created by the tapered threads meshing together. Always use a small amount of PTFE paste or tape on NPT threads and tighten to finger tight,...