D175 - COLOUR DISPLAY MODULE
D175 - COLOUR DISPLAY MODULE DESCRIPTION The D175 is part of MoTeC's D1 Series of colour displays designed for use with MoTeC data loggers. Featuring a 5 inch high resolution LCD screen, 10 programmable, full...
DMCC - DUAL MAG CONVERTER - GEN PURPOSE
DMCC - DUAL MAG CONVERTER - GEN PURPOSE DESCRIPTION A magnetic sensor consists of a wound coil of wire that generates a voltage between the sensor wires when the magnetic field strength changes as the...
DUAL HALF BRIDGE
DUAL HALF BRIDGE SPECIFICATIONS Motec | 41213 | Engine Management Electrical Output current Continuous DC current 20 A (total) Peak surge current 500 A Max. operating frequency 50 kHz @ 28 V Switching delay, typical...
E888A I/O EXPANDER
E888A I/O EXPANDER SPECIFICATIONS Motec | 14007 | Data Acquisition & Display Inputs 8 x analogue voltage inputs, 10 bit (4.9 mV) resolution 0 to 5 V, suitable for potentiometers, voltage output sensors and variable...
ETH to AUTOSPORT 1.8M
ETH to AUTOSPORT 1.8M DESCRIPTION A mating connector must be wired to the C125/CDL3/SDL3/ADL3/EDL3 connector to provide a connection point for a standard Ethernet Cable. SPECIFICATIONS Motec | 61132 | Communications Ethernet RJ45 socket to...
ETHERNET TO SUPERSEAL 0.5 METRE
ETHERNET TO SUPERSEAL 0.5 METRE DESCRIPTION A mating connector must be wired to the C125/CDL3/SDL3/ADL3/EDL3 connector to provide a connection point for a standard Ethernet Cable.
ETHERNET TO SUPERSEAL 1.8 METRE
ETHERNET TO SUPERSEAL 1.8 METRE DESCRIPTION A mating connector must be wired to the C125/CDL3/SDL3/ADL3/EDL3 connector to provide a connection point for a standard Ethernet Cable. SPECIFICATIONS Motec | 61236 | Communications Ethernet to Super...
FITTING FOR EGT(R1000) SENS M/S14x1.5 WELDIN FITTING
FITTING FOR EGT(R1000) SENS M/S14x1.5 WELDIN FITTING SPECIFICATIONS Motec | 59016 | Position Sensors Fitting for EGT R1000 Sensor Weld in Mild Steel 14 x 1.5
FLANGE MOUNTED HALL SENSOR IP67
FLANGE MOUNTED HALL SENSOR IP67 DESCRIPTION Hall sensors contain a semiconductor Hall effect integrated circuit (IC) and a magnet. There are Hall sensor types available that can be used with a tooth (gear) style trigger...
FME - POWER SUPPLY
FME - POWER SUPPLY DESCRIPTION MoTeC's T2 Server is a flexible telemetry system that allows the setup of a centralised hub for receiving, processing and transmitting a large number of independent telemetry streams. Combined with...