Bosch 2200cc Flow Matched Injector Set For Mazda RX-7 FC Series 4/5 13Bt
A direct fit for the 13B Turbo in the Mazda RX7 Series 4 and 5, this set includes the injector extensions and plug and play harness adapters required to fit your vehicle. These injectors have...
Bosch 2200cc CNG 3/4 Length Injector
Originally designed for use with CNG (compressed natural gas) this Bosch injector is a good budget offering for a large flowing injector, If used with E85 regular maintenance on the injectors is highly recommended Flow:...
Bosch 1200cc Modified 3/4 Length Injector 11mm
Bosch Modified EV14 3/4 Length 11mm Flow: 1200cc/min @ 3bar Connector: DENSO Impedance : High (12 Ohms) Size: 3/4 Length 11mm Upper Orings with Square Section Lower Seal Ethanol & Methanol Safe
Bosch 1200cc Modified Short Length Injector with Extended Nose
Drop in EV14 Modified Bosch Flow: 1200cc/min @ 3 bar Connector: Bosch Impedance : High (12 Ohms) Size: Short Length with Extended Nose Ethanol & Methanol Safe
Bosch 453cc 3/4 Length Injector
Drop in injector EV6 Bosch Flow: 453cc/min @ 3bar Connector: Bosch Impedance : High (12 Ohms) Size: 3/4 Length 14mm Orings
Bosch 347cc Full Length Injector
Supercharged V6 Holden Injector Drop in EV6 Bosch Flow: 347cc/min @ 3bar Connector: Bosch Impedance : High (12 Ohms) Size: Full Length
RACEWORKS FUEL CELL FOAM E85 SAFE 514 X 90 X 110
RACEWORKS FUEL CELL FOAM E85 SAFE 514 X 90 X 110 The Raceworks range of fuel accessories has been developed specifically to complement our core range of fuel components, which means hassle-free installation for every...
RACEWORKS Billet Aluminium Fuel Cell Cap 45 Degrees
RACEWORKS Billet Aluminium Fuel Cell Cap 45 Degrees Raceworks Fuel Cells have been crafted to meet the most extreme racing and performance demands. All cells are seamlessly robot welded from 5052 aluminium, and presented in...
RACEWORKS FUEL RAILS MAZDA RX7 SERIES 6/7/8 13BT
RACEWORKS FUEL RAILS MAZDA RX7 SERIES 6/7/8 13BT Mounting Hardware As Pictured. Rails Have AN-8 O-Ring Ports on Ends. Included fittings are AN-6 Male Flare Adapters x4. Rails suit Full Length Injectors with 14mm Top...
RACEWORKS FUEL RAILS HOLDEN LS2/LS3/L76/L77/L98 (6L/6.2L)
RACEWORKS FUEL RAILS HOLDEN LS2/LS3/L76/L77/L98 (6L/6.2L) Mounting hardware as pictured. Rails have AN-8 O-Ring ports on ends and in centres. Included fittings are AN-8 Plugs x2. Rail accepts Short injectors with 14mm Top O-rings. NOTE: Manifolds...
RACEWORKS FUEL RAIL NISSAN Skyline & Stagea
RACEWORKS FUEL RAIL NISSAN Skyline GT-R R32/R33/R34 & Stagea C34 RB26DETT (2.6L) Mounting hardware as pictured. Rail has AN-8 O-Ring ports on ends, and a AN-6 O-Ring port in centre. Included fittings are AN-8 male...
RACEWORKS FUEL RAIL SUIT NISSAN
RACEWORKS FUEL RAIL SUIT NISSAN SILVIA, 180SX, S13 AND SR20 Mounting Hardware as Pictured. Rail has AN-8 ORB on Ends and AN-6 ORB in centre. Takes a Full Length, 3/4 Length or short injector with...