Bosch 145 PSI Fuel/Oil Pressure and Temperature Sensor
Bosch 145 PSI Fuel/Oil Pressure and Temperature Sensor THREAD: M10 x 1.0 INCLUDES: Includes: Matching plug and pins, M10 x 1.0 to 1/8NPT adaptor. NOTES: Used to measure fluid pressure and temperature Pressure Range 0-150 PSI Temperature Range...
Bosch 4000psi Fluid Pressure and Temperature Sensor
Bosch 4000psi Fluid Pressure and Temperature Sensor Includes: Includes: Matching plug, pins and seals Notes: Used to measure fluid pressure and temperature Pressure Range 0-4060 PSI Temperature Range -40 to 140 Deg C
Bosch 60mm Electronic Throttle Body - Includes connector and pins
Bosch 60mm Electronic Throttle Body - Includes connector and pins Suits: Nexus and Elite VCUs and ECUs that support Drive by Wire Throttle Control (DBW) Includes: 60mm Bore Size Electronic Throttle Body and mating Connector...
Bosch 68mm Electronic Throttle Body - Includes connector and pins
Bosch 68mm Electronic Throttle Body - Includes connector and pins Suits: Nexus and Elite VCUs and ECUs that support Drive by Wire Throttle Control (DBW) Includes: 68mm Bore Size Electronic Throttle Body and mating connector...
Bosch 74mm Electronic Throttle Body - Includes connector and pins
Bosch 74mm Electronic Throttle Body - Includes connector and pins Suits: Nexus and Elite VCUs and ECUs that support Drive by Wire Throttle Control (DBW) Includes: 74mm Bore Size Electronic Throttle Body and mating connector...
Bosch 82mm Electronic Throttle Body - Includes connector and pins
Bosch 82mm Electronic Throttle Body - Includes connector and pins Suits: Nexus and Elite VCUs and ECUs that support Drive by Wire Throttle Control (DBW) Includes: 82mm Bore Size Electronic Throttle Body and mating connector...
CAN Adaptor Loom - DT-4 to DTM-4
CAN Adaptor Loom - DT-4 to DTM-4 Suits: CAN Keypad 2 x 4 and 3 x 5 Includes: 1 x HT-130045 - Adaptor Harness Notes: CAN Cable - DT-4 to DTM-4 Adaptor- Suits CAN Keypad...
CAN Adaptor Loom DTM-4 to 6-pin Circular Connector
CAN Adaptor Loom DTM-4 to 6-pin Circular Connector Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force GDI) Includes: 1 x CAN Adaptor Loom (DTM-4 to 6-pin Circular Connector)...
CAN Adaptor Loom DTM-4 to Flying Leads
CAN Adaptor Loom DTM-4 to Flying Leads Suits: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series Connector Includes: 1 x HT-130046 CAN Adaptor Loom (DTM-4 to Flying leads) Notes:...
CAN Adaptor Loom DTM-4 to JST 5-pin
CAN Adaptor Loom DTM-4 to JST 5-pin Suits: Haltech IC-7 Dash, WBC 1, WBC 2 and Link Plug-in ECUs Includes: 1 x CAN Adaptor Loom (DTM-4 to JST 5-pin) - Suits Link PlugIn ECUs Notes:...
CAN Adaptor Loom DTM-4 to Minifit Jr
CAN Adaptor Loom DTM-4 to Minifit Jr Suits: Haltech iC-7 and Microtech ECUs Includes: 1 x HT-130049 Can Adaptor Loom Notes: Use with Microtech CAN Hub for direct plug and play
CAN Keypad 15 button (3x5)
SUITS: Haltech NSP compatible devices THREAD: M6INCLUDES: 1 x 15 Button Keypad (3x5), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Label Set, 1 x Mounting Nut...