{"product_id":"motec-11310","title":"M130 YAMAHA FX SVHO 2019 KIT (Enabled + Licence)","description":"\u003cp\u003eThis Plug-In Kit is designed as a complete replacement for the factory OE (original equipment) ECU, using existing wiring, sensors and mounting hardware to deliver plug-in convenience with fully programmable control. The ruggedised M130 ECU is supplied with the Package preloaded, providing complete functionality for the Yamaha FX SVHO engine. The Package is based on MoTeC's GPR Package with additional features unique to this engine.\u003c\/p\u003e\n\u003cp\u003eAlong with drive-by-wire, fuel and ignition, this Package adds knock control to the Yamaha FX SVHO and also supports OE ECU features, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStarting and Immobilizer systems.\u003c\/li\u003e\n\u003cli\u003eOE dash operation via OE CAN busses.\u003c\/li\u003e\n\u003cli\u003eGear forward and reverse operation using the OE RiDE (Reverse with Intuitive Deceleration Electronics) system.\u003c\/li\u003e\n\u003cli\u003eTrim position monitoring.\u003c\/li\u003e\n\u003cli\u003eConsistent operation of all factory controls.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe start file supplied in the Package contains all the calibrations and settings for the sensors, fuel injectors, ignition coils, knock control and throttle servo. Users can begin tuning to their desired power level right away with the assurance of a safe base tune that is equivalent to the original ECU.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFEATURES :\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFully integrates with these OE systems: immobilizer, trim monitoring, forward\/reverse (via RiDE system), dash and all handle bar controls.\u003c\/li\u003e\n\u003cli\u003eLambda control is supported with MoTeC's LTCN and an NTK sensor, requiring additional installation. (Not included in this Plug-In Kit)\u003c\/li\u003e\n\u003cli\u003ePre-configured calibrations for OE sensors, switches and engine triggers including:\n\u003cul\u003e\n\u003cli\u003eCoolant Temperature\u003c\/li\u003e\n\u003cli\u003eCrank and Sync triggers\u003c\/li\u003e\n\u003cli\u003eEngine Oil Temperature\u003c\/li\u003e\n\u003cli\u003eEngine Temperature High\u003c\/li\u003e\n\u003cli\u003eFuel Pressure\u003c\/li\u003e\n\u003cli\u003eInlet Air Temperature\u003c\/li\u003e\n\u003cli\u003eInlet Manifold Pressure\u003c\/li\u003e\n\u003cli\u003eKnock detection\u003c\/li\u003e\n\u003cli\u003eThrottle Lever\u003c\/li\u003e\n\u003cli\u003eThrottle Servo Position\u003c\/li\u003e\n\u003cli\u003eVehicle Longitudinal Acceleration\u003c\/li\u003e\n\u003cli\u003eVehicle Tip Over Switch\u003c\/li\u003e\n\u003cli\u003eReverse Lever\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePre-configured control of primary fuel system.\u003c\/li\u003e\n\u003cli\u003ePre-configured reference mode for engine synchronisation.\u003c\/li\u003e\n\u003cli\u003ePre-configured physical settings for engine displacement, fuel density, stoichiometric ratio, fuel pressure, and primary injector linearisation, which allow for simplified engine start-up prior to tuning.\u003c\/li\u003e\n\u003cli\u003ePre-configured CAN messaging for OE systems including immobilizer, trim, dash display and the RiDE system.\u003c\/li\u003e\n\u003cli\u003ePre-configured transient fuelling compensation using physical modelling of fuel film.\u003c\/li\u003e\n\u003cli\u003ePre-configured on-board knock control for each cylinder using OE knock sensor.\u003c\/li\u003e\n\u003cli\u003eConfigurable boost control.\u003c\/li\u003e\n\u003cli\u003eConfigurable anti-lag with ignition timing limit, fuel volume trim, ignition cut, fuel cut, engine speed limit, boost aim and throttle aim tables.\u003c\/li\u003e\n\u003cli\u003eGPS acquisition and logging via CAN or RS232.\u003c\/li\u003e\n\u003cli\u003eIntercooler temperature and spray control.\u003c\/li\u003e\n\u003cli\u003eLap distance, time and number with split and sector options via MoTeC's BR2 (Beacon Receiver) or switched input.\u003c\/li\u003e\n\u003cli\u003eConfigurable launch control with tables.\u003c\/li\u003e\n\u003cli\u003eRace time system with tables for ignition timing trim, fuel mixture aim, boost limit, and throttle limit.\u003c\/li\u003e\n\u003cli\u003eEngine load average channel with tables for engine speed limit, ignition timing trim, fuel mixture aim, boost limit, and throttle limit.\u003c\/li\u003e\n\u003cli\u003eEngine run time total for engine hour logging.\u003c\/li\u003e\n\u003cli\u003eConfigurable security for multiple users with differing access options.\u003c\/li\u003e\n\u003cli\u003eECU CAN receive from a defined ID base address for data reception from other MoTeC devices.\u003c\/li\u003e\n\u003cli\u003e8 configurable driver switches and 8 rotary switches (each with 10 positions) that can be simultaneously mapped to anti lag, boost limit, cruise, engine speed limit maximum, fuel mixture aim, ignition timing, launch, no wake mode, race time reset and throttle lever translation.\u003c\/li\u003e\n\u003cli\u003ePulsed tachometer output with configurable output pin and scaling.\u003c\/li\u003e\n\u003cli\u003eOptional channels for additional sensors and switches via input pin and\/or CAN message, including:\n\u003cul\u003e\n\u003cli\u003eAirbox Mass Flow, Temperature and Pressure\u003c\/li\u003e\n\u003cli\u003eAmbient Pressure and Temperature\u003c\/li\u003e\n\u003cli\u003eBoost Pressure\u003c\/li\u003e\n\u003cli\u003eEngine Crankcase Pressure\u003c\/li\u003e\n\u003cli\u003eEngine Oil Level\u003c\/li\u003e\n\u003cli\u003eEngine Oil Pressure\u003c\/li\u003e\n\u003cli\u003eExhaust Pressure\u003c\/li\u003e\n\u003cli\u003eExhaust Temperature (EGT) via TCA Thermocouple Amplifier, Generic CAN or E888 for Collector and Cylinders 1 to 4\u003c\/li\u003e\n\u003cli\u003eExhaust Lambda via LTC, LTCN or PLM for Collector and Cylinders 1 to 4\u003c\/li\u003e\n\u003cli\u003eFuel Composition\u003c\/li\u003e\n\u003cli\u003eFuel Flow\u003c\/li\u003e\n\u003cli\u003eFuel Tank Level\u003c\/li\u003e\n\u003cli\u003eFuel Temperature\u003c\/li\u003e\n\u003cli\u003eFuel Water Content\u003c\/li\u003e\n\u003cli\u003eGear Position\u003c\/li\u003e\n\u003cli\u003eJet Nozzle Pressure, Nozzle Angle, Intake Pressure and Intake Temperature\u003c\/li\u003e\n\u003cli\u003eIntercooler Temperature\u003c\/li\u003e\n\u003cli\u003eSteering Angle\u003c\/li\u003e\n\u003cli\u003eTurbocharger Speed, Temperature and Pressure\u003c\/li\u003e\n\u003cli\u003eG-Force (acceleration) - Longitudinal, Lateral, Vertical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eINCLUDED IN THE KIT :\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e13130M\u003c\/b\u003e - M130 ECU MARINE pre-loaded with Yamaha FX SVHO 2019 Package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e61452\u003c\/b\u003e - M130 YAMAHA FX SVHO 2019 ADAPTOR KIT\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e61225\u003c\/b\u003e - NETWORK CABLE RJ45 1.5 METRE\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e61404\u003c\/b\u003e - M1 ADAPTOR 250MM 26W KEY 1 STUB LOOM\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e61406\u003c\/b\u003e - M1 ADAPTOR 250MM 34W KEY 1 STUB LOOM\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e61453\u003c\/b\u003e - M130 YAMAHA FX SVHO 2019 ADAPTOR BOX\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e61454\u003c\/b\u003e - YAMAHA FX SVHO 2019 BREAKOUT LOOM\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e61455\u003c\/b\u003e - M130 YAMAHA FX SVHO 2019 MOUNTING KIT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eLicence\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003e23001\u003c\/b\u003e – M1 LICENCE - PERSONAL WATERCRAFT\u003c\/p\u003e","brand":"Motec","offers":[{"title":"Data Level 1 - Included","offer_id":46442042818757,"sku":"11310","price":3921.73,"currency_code":"AUD","in_stock":true},{"title":"Data Level 2","offer_id":46442042851525,"sku":"11310 - DL2","price":4254.86,"currency_code":"AUD","in_stock":true},{"title":"Data Level 3 - Includes Level 2","offer_id":46442042884293,"sku":"11310 - DL3","price":4789.74,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1784\/5397\/files\/MOT11310.jpg?v=1782093549","url":"https:\/\/quickbitz.com.au\/products\/motec-11310","provider":"Quickbitz","version":"1.0","type":"link"}